Trouble
|
Reasons
|
Troubleshooting
|
Deviation of chain scraper
|
1. The whole equipment installed improperly; casing straightness is too large; wheel axle deflection; head, tail wheel misalignment.
2. casing transmutation
3. Tail wheel inclines after adjusting the take-up unit
|
1.checked the installation quality
2.Adjusting the casing
3. readjustment
|
Chain scraper break
|
1. Chain wear
2. The conveyor Overloading operation result in the strength is not enough.
3. Some hard material fallen into the closed trough and locked the scraper
|
1.Change chain
2.Eliminate long time overloading operation
3. After manual discharging the machine should feeding uniformly
|
Chain scraper bent result in break
|
1. Casing are not straight
2. The location of flange is offset then locks the scraper.
|
1.checked the installation quality
2.dismantled original installation and install it again
|
During the operation of chain scraper, it gives out excessive noise
|
1. Some hard material fallen into the closed trough
2. Some chain with looseness or Inflexible faults
|
1.clear debris
2.change chain
|
Head wheel not fit in with chain scraper well
|
1. Head wheel chain inclines; Casing misalignment
2. The chain is wearing out after long time operation
|
1.rectify head wheel shaft
2.change chain
|
For more information, pls do not hesitate to contact us via :
Mobilephoe:+86 18338953783
Tel: +86 373 579 9198
Fax: +86 373 507 1699
Address: 289 Yellow River Road, Xinxiang City, Henan Province, China
没有评论:
发表评论